The DEWALT DWS727 Double Bevel Slide Mitre Saw with XPS cross cut positioning system for increased accuracy and visibility, unlike a laser system it does not require any calibration. The grooving stop allows for adjustment of the cutting depth, ideal for grooving and rebating applications. Whilst the cam action, mitre lock function, makes mitre setting faster and easier, allowing the user to quickly adjust angles between 0-50° left and 0-60° right.

• Heavy-duty construction
• Ideal for site work
• Variable speed trigger

• Ergonomic handle
• Extremely durable tool design
• Intelligent trigger allowing total control

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 50 mm
• Flute Length: 220 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 49 mm
• Flute Length: 220 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 48 mm
• Flute Length: 220 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 47 mm
• Flute Length: 215 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 46 mm
• Flute Length: 215 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 45 mm
• Flute Length: 210 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 44 mm
• Flute Length: 210 mm

• Application: For holding round dies for the clean cutting of external threads.
• Size (Die Outside Diameter): 3"
• Length: 790 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 43 mm
• Flute Length: 210 mm

• Compact and lightweight design
• Large trigger switch
• Small gear housing for easy handling and manoeuvrability

• Tool-less blade change
• Trigger switch with lock-off lever
• Electric brake

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 42 mm
• Flute Length: 205 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 41 mm
• Flute Length: 205 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 40 mm
• Flute Length: 200 mm

• 22 minute charge time with the air cooled Makstar Optimum Charging System.
• Anti-restart function with warning lamp.
• Capable of using wheels or discs for mains grinders.

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 39 mm
• Flute Length: 200 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 38 mm
• Flute Length: 200 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 37 mm
• Flute Length: 195 mm

• Application: Drilling in steel, cast steel - alloyed and non-alloyed, stainless steel, titanium and aluminium
• No. of Drills: 25 Drills
• Diameter range: 1.0 - 13.0

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 36 mm
• Flute Length: 195 mm

• 3 orbit settings and a variable speed trigger
• Bevel cutting up to 45° left or right
• Supplied with: 1 x Blade and 1 x Hex Wrench

• Small gear housing for easy handling and manoeuvrability
• Anti-restart function
• Powerful 720W motor with excellent heat-resistant

• Double Insulation
• 720w input voltage
• 115m wheel diameter

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 35 mm
• Flute Length: 190 mm

• Application: Drilling in steel, cast steel - alloyed and non-alloyed, stainless steel, titanium and aluminium
• No. of Drills: 25 Drills
• Diameter range: 1.0 - 13.0

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 34 mm
• Flute Length: 190 mm

• Application: For holding round dies for the clean cutting of external threads.
• Size (Die Outside Diameter): 2.1/4
• Length: 610 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 33 mm
• Flute Length: 185 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 32 mm
• Flute Length: 185 mm

• Application: For turning Hand Taps and internal thread tools.
• Nominal Tap Size (metric): 12.0 - 27.0
• Pipe (Inch): 1/4 - 5/8

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 31 mm
• Flute Length: 180 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 29 mm
• Flute Length: 175 mm

• Application: For BSPF threads
• TPI: 14
• Flute Length: 29.0 mm

• Application: For BSPF threads
• TPI: 14
• Flute Length: 29.0 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 30 mm
• Flute Length: 175 mm

• Application: With reduced 1/2" shank for use when chuck capacity is limited
• Dimension: 1.3/8" DIA.
• Flute Length: 75 mm

• Application: For turning Hand Taps and internal thread tools.
• Nominal Tap Size (metric): 6.0 - 12.0
• Pipe (Inch): 1/8 - 1/4

• Application: For producing countersinks for cap screws
• Dimension: 30 mm
• Capacity: 4.2 - 30.0

• Application: For producing countersinks for cap screws
• Dimension: 31 mm
• Capacity: 4.2 - 31.0

• Application: Drilling in steel, cast steel - alloyed and non-alloyed, stainless steel, titanium and aluminium
• No. of Drills: 19 Drills
• Diameter range: 1.0 - 10.0

• Application: For producing countersinks for cap screws
• Self centering and chatter free
• Can be used for chamfering

• Application: Drilling in steel, cast steel - alloyed and non-alloyed, stainless steel, titanium and aluminium
• No. of Drills: 19 Drills
• Diameter range: 1.0 - 10.0

• Application: Drilling in steels, cast irons, soft aluminium, and plastic
• No. of Drills: 41 Drills
• Diameter range: 6.0 - 10.0

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 28 mm
• Flute Length: 170 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 27 mm
• Flute Length: 170 mm

• Application: For turning Hand Taps and internal thread tools.
• Nominal Tap Size (metric): 1.0 - 6.0
• Pipe (Inch): N/A

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 26 mm
• Flute Length: 165 mm

• Application: Drilling steels, stainless steels, cast irons, titanium, aluminium and plastic
• Dimension: 26.5 mm
• Flute Length: 165 mm